Water Science and Technology

The potential of Pleurotus ostreatus spent mushroom compost (PSMC) as a green biosorbent for nickel (II) biosorption was investigated in this study. A novel approach of using the half-saturation concentration of biosorbent to rapidly determine the uptake, kinetics and mechanism of biosorption was employed together with cost per unit uptake analysis to determine the potential of this biosorbent. Fifty per cent nickel (II) biosorption was obtained at a half-saturation constant of 0.7 g biosorbent concentration, initial pH in the range of 4–8, 10 min contact time, 50 mL 50 mg/L nickel (II) initial concentration. The experimental data were well fitted with the Langmuir isotherm model and the maximum nickel (II) biosorption was 3.04 mg/g. The results corresponded well to a second pseudo order kinetic model with the coefficient of determination value of 0.9999. Based on FTIR analysis, the general alkyl, hydroxyl or amino, aliphatic alcohol and carbonyl functional groups of biosorbent were...

Production of biogas from different organic materials is a most interesting source of renewable energy. The biomethane potential (BMP) of these materials has to be determined to get insight in design parameters for anaerobic digesters. Although several norms and guidelines for BMP tests exist, inter-laboratory tests regularly show high variability of BMPs for the same substrate. A workshop was held in June 2015, in Leysin, Switzerland, with over 40 attendees from 30 laboratories around the world, to agree on common solutions to the conundrum of inconsistent BMP test results. This paper presents the consensus of the intense roundtable discussions and cross-comparison of methodologies used in respective laboratories. Compulsory elements for the validation of BMP results were defined. They include the minimal number of replicates, the request to carry out blank and positive control assays, a criterion for the test duration, details on BMP calculation, and last but not least criteria fo...

This paper presents the methodologies to determine odour in ambient air by field inspection that will be a new European standard. The objective is to characterise the odour in a defined area. Without making a link with potential annoyance due to the presence of odours, the described methods propose the way to characterise an exposed environment. Two approaches are defined in the new standard: the grid method and the plume method. The grid method can be used to determine the exposure to ambient odours in a defined area of study, using direct observation of recognisable odours in the field by human panel members. This method must be applied over a sufficiently long period of time (6 or 12 months) to be representative of the meteorological conditions of that location. The result is the distribution of the frequency of exposure to odours within the assessment area. The plume method can be used to determine the extent of detectable and recognisable odours from a specific source using dir...

Acid mine drainage (AMD) – characterized by high acidity and elevated sulfate and metal concentrations – represents a big environmental concern. Biological sulfate reduction has become an alternative to the classical physicochemical methods. In this study, domestic wastewater (DW) was tested as a cost-effective carbon-source for the remediation of AMD. Sediments from Tinto River, an extreme acidic environment with an elevated concentration of metals, were used as inoculum. Three anaerobic bioreactors with different microbial supports were fed with a 1:10 (v:v) mixture of synthetic AMD:DW. Around 50% of the organic matter present in the DW co-precipitated with the metals from the AMD previous to feeding the reactor. Therefore, the reactors had to be supplemented with an extra carbon-source (acetate) to achieve higher S elimination. Elevated removal efficiencies of chemical oxygen demand (COD) (>88%), sulfate (>75%), Fe (>85%) and other dissolved metals (>99% except for Mn...

Instrumentation, control and automation (ICA) are key technologies in modern water and wastewater systems. Ever present disturbances make it necessary to automatically attenuate their consequences. A wastewater treatment system is load driven, while a water distribution system is demand driven. Despite the variability the system outputs have to be satisfactory. Economic realities encourages the application of ICA to make a maximum use of plant capacities. An increasing complexity of competing processes in a modern nutrient removal plant makes more elaborate control necessary. The final goal of protecting the environmental resources necessitates an integrated view of several interdependent systems, the collection, transport and treatment processes. In this integrating development ICA will be a decisive technology.

The efficiency of ozone as a pre- and post-treatment to UASB treatment was investigated, followed by a study into UASB reactor performance with ozonated wastewater as substrate. Combinations of pre- and/or post-ozonation with UASB treatment gave better results than ozonation or UASB alone and COD reductions of 53.0-98.9% were achieved for treatment of canning and winery wastewaters. A UASB reactor was fed with pre-ozonated cannery wastewater for over 70 d. COD removal improved from between 58.8 and 64.4% to between 85.3 and 91.8% after pre-ozonated substrate feed commenced. Subsequent increases in organic loading rate (OLR) from 2.4 to 3.4 kgCOD m(-3) x d(-1) did not affect reactor performance. By including a final post-ozonation treatment to this UASB effluent a total COD reduction of 99.2% was achieved.

Methylene blue (MB) is the cationic dye that is widely used for coloring cotton, wool, and silk. Since MB is harmful to human beings and toxic to microorganisms, there is the need to find cheap and efficient methods for removal of MB from wastewater prior to disposal into natural waters. In the present study, MB adsorption potential of MgO/AC prepared using a sol–gel-thermal deep-coating method was compared with the activated carbon (AC). The central composite design (CCD) as a method of the response surface methodology (RSM) was applied to minimize the number of runs and process optimization. The characterization of the microporous MgO/AC composite showed that the magnesium oxide nanoparticles were successfully coated on the AC and the BET specific surface area of AC and MgO/AC were 1,540 and 1,246 m2/g, respectively. The MB removal efficiency and the maximum adsorption capacity of AC and MgO/AC were 89.6, 97.5% and 571.7, 642.3 mg/g, respectively under optimum operational conditio...

The Standards for water quality in Fiji defined in the Environment Management Regulations 2007 only relate to effluent discharge into the environment. Urbanisation is contributing to wastewater contamination in receiving estuary and marine recreational waters, thus requiring specific guidelines. To create a baseline for this, a sampling programme with relevant physico-chemical and biological parameters was implemented at 3 sites along the Suva foreshore, for 8 consecutive months, during low and high tides. Analysis was done in triplicates, using standard methods approved for the examination of water and wastewater. In the absence of relevant Fiji guidelines, the results were compared with ANZECC (2000) guidelines for estuary and marine waters. Low DO levels, high COD, TN, NH3, TP, OP and heavy metal concentrations were measured in all 3 sites. For instance, TN and NH3 concentrations as high as 4.44 ±0.99 mg/L and 2.58 ± 0.89 mg/L respectively were recorded in Wailea river (Site 2). ...

An integrated fluidized bed reactor (FBR) has been employed as the treatment for petrochemical industry wastewaters with high organic matter and aromatic compounds, under anaerobic and aerobic conditions. The system was operated at hydraulic residence time (HRT) of 2.7 and 2.2 h in the anaerobic and aerobic reactor, respectively. The degree of fluidization in the beds was 30%. This system showed a high performance on the removal of organic matter and aromatic compounds. At different organic loading rates (OLR), the chemical oxygen demand (COD) removal in the anaerobic reactor was close to 85% and removals of the COD up to 94% were obtained in the aerobic reactor. High removals of benzene, toluene, ethylbenzene, xylenes, styrene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene and naphthalene were achieved in this study.

... B. van Hattum, IVM-VU, De Boelelaan 1115, 1081 HV Amsterdam 79. ... This can be described by: P = P (I - ebR) (2) * ouiput ' input \* ь f V ' With: Poutput = runoff load in ton.km2.yr ' Pinput = input load in ton.km'2.yr"' R = sediment yield (ton.km'^yr1) b = an empirical coefficient (ton ...

To complement physical measures or indices of river health a social benchmarking instrument has been developed to measure community dispositions and behaviour regarding river health. This instrument seeks to achieve three outcomes. First, to provide a benchmark of the social condition of…

In this study, the endogenous respiration rate and the observed biomass yield of denitrifying methylotrophic biomass were estimated through measuring changes in denitrification rates (DNR) as a result of maintaining the biomass under methanol deprived conditions. For this purpose, activated sludge biomass from a full-scale wastewater treatment plant was kept in 10-L batch reactors for 8 days under fully aerobic and anoxic conditions at 20 °C without methanol addition. To investigate temperature effects, another biomass sample was placed under starvation conditions over a period of 10 days under aerobic conditions at 25 °C. A series of secondary batch tests were conducted to measure DNR and observed biomass yields. The decline in DNR over the starvation period was used as a surrogate to biomass decay rate in order to infer the endogenous respiration rates of the methylotrophs. The regression analysis on the declining DNR data shows 95% confidence intervals of 0.130 ± 0.017 day−1 for ...

The knowledge of the active biomass amount and its characterisation is of primary importance for the management and for the design of wastewater treatment plants on the basis of the recently developed models. OUR curves obtained in aerobic exponential growth tests are proposed by several authors as an indirect method to estimate the active fraction. The aim of this work is the application of a direct method to measure the viable biomass based on flow cytometry techniques and the comparison with the active fraction obtained from respirometric tests. To assess the viable fraction of a biomass expressed in terms of COD concentration it is necessary to estimate the biovolume of viable bacteria and to know the specific carbon content per cell. For the investigated activated sludge samples, the bacterial biomass measured by FCM was 588 mgCOD L(-1) on average in a two-months period. This value of active fraction corresponds to 14% of particulate COD. Active biomass values measured with the...

The combined and individual effects of aluminium and sulphate at concentrations of 1,000 mg/l as Al(OH)3, and 150 mgSO4(2-)/L as K2SO4, respectively, on the anaerobic digestion of sludge from enhanced primary treatment (EPT) were evaluated in 1 L capacity semi continuous reactors. It was found that at 59 days, aluminium inhibits the specific methanogenic activity (SMA) of methanogenic and acetogenic bacteria resulting in a 50% to 72% decrease. Sulphate also inhibits (48% to 65%) the SMA of the same type of bacteria. Methanogenic and acetogenic bacteria were able to adapt, to a different extent, to the assayed concentrations of aluminium and sulphate. However, the combination of aluminium and sulphate resulted in a higher inhibition, especially of the hydrogenophilic methanogenic bacteria. Indeed, this effect remained during the time of the experiment, maintaining an inhibition of 44% at 114 days. Feeding with EPT sludge led to a bigger decrease in SMA of each bacterial group, with r...

A pilot-scale irrigation scheme was set up in South-West Portugal to investigate the causes of emitter clogging which has been observed when waste stabilisation pond effluents are used for drip irrigation of crops. During field trials over a period of two growing seasons, the ...

To achieve a successful and sustainable adaptation to climate change we need to transform the way we think about change. Much water management research has focused on technical innovation with a range of new solutions developed to achieve a ‘more sustainable and integrated urban water management cycle’. But Danish municipalities and utility companies are struggling to bring such solutions into practice. ‘Green infrastructure’, for example, requires the consideration of a larger range of aspects related to the urban context than the traditional urban water system optimization. There is the need for standardized methods and guidelines to organize transdisciplinary processes where different types of knowledge and perspectives are taken into account. On the basis of the macro–meso–micro pattern inspired by complexity science and transition theory, we developed a conceptual framework to organize processes addressing the complexity characterizing urban water management in the context of c...

Anaerobic digestion of sludge has been part of the treatment plant in Malmö for many years and several projects on optimisation of the digestion process have been undertaken in full scale as well as in pilot scale. In order to facilitate a more sustainable solution in the future for waste management, solid waste organic waste is sorted out from households for anaerobic treatment in a newly built city district. The system for treatment of the waste is integrated in a centralised solution located at the existing wastewater treatment plant. A new extension of the digester capacity enables separate as well as co-digestion of sludge together with urban organic waste from households, industry, restaurants, big kitchens, food stores, supermarkets, green markets etc. for biogas production and production of fertiliser. Collection and pre-treatment of different types of waste are in progress together with examination of biogas potential for different types of organic waste. Collection of hous...

The decimal elimination capacity (DEC) of slow sand filters (SSF) for viruses, bacteria and oocysts of Cryptosporidium has been assessed from full-scale data and pilot plant and laboratory experiments. DEC for viruses calculated from experimental data with MS2-bacteriophages in the pilot plant filters was 1.5-2 log10. E. coli and thermotolerant coliforms (Coli44) were removed at full-scale and in the pilot plant with 2-3 log10. At full-scale, Campylobacter bacteria removal was 1 log10 more than removal of Coli44, which indicated that Coli44 was a conservative surrogate for these pathogenic bacteria. Laboratory experiments with sand columns showed 2-3 and >5-6 log10 removal of spiked spores of sulphite-reducing clostridia (SSRC; C. perfringens) and oocysts of Cryptosporidium respectively. Consequently, SSRC was not a good surrogate to quantify oocyst removal by SSF. Removal of indigenous SSRC by full-scale filters was less efficient than observed in the laboratory columns, probabl...

Cryptosporidium parvum oocysts in water were exposed to distinct wavelength bands of collimated beam ultraviolet (UV) radiation across the germicidal UV wavelength range (210-295 nm) that were emitted from a medium pressure (MP) mercury vapour lamp. The dose of UV radiation transmitted though each narrow bandpass filter was measured utilising potassium ferrioxalate actinometry. Oocyst infectivity was determined using a cell culture assay and titre was expressed as an MPN. The log10 inactivation for each band of radiation was determined for a dose of 2 mJ/cm2. Doses from all wavelengths between 250-275 nm resulted in approximately 2 log10 inactivation of Cryptosporidium parvum oocyst infectivity while doses with wavelengths higher and lower than this range were less effective. Because polychromatic radiation from MP UV lamps had about the same germicidal activity between the wavelengths of 250-275 nm for inactivation of oocyst infectivity, there was no unique advantage of MP UV over ...

Sorption of phosphorus (P) to the bed sand medium is a major removal mechanism for P in subsurface flow constructed wetlands. Selecting a sand medium with a high P-sorption capacity is therefore important to obtain a sustained P-removal. The P-removal capacities of 13 Danish sands were evaluated and related to their physico-chemical characteristics. The P-removal properties of sands of different geographical origin varied considerably and the suitability of the sands for use as media in constructed reed beds thus differs. The P-sorption capacity of some sands would be used up after only a few months in full-scale systems, whereas that of others would subsist for a much longer time. The most important characteristic of the sands determining their P-sorption capacity was their Ca-content. Also the P-binding capacities of various artificial media were tested (light-expanded-clay-aggregates (LECA), crushed marble, diatomaceous earth, vermiculite and calcite). Particularly calcite and cr...

A protocol was developed for determining the biochemical methane potential (BMP) of plant material using the OxiTop® system. NaOH pellets for CO2 absorption and different pretreatment methods were tested for their influence in the BMP test. The use of NaOH pellets in the headspace of the bottle negatively affected the stability of the test increasing the pH and inhibiting methanization. Sample comminution increased the biodegradability of plant samples. Our results clearly indicate the importance of test conditions during the assessment of anaerobic biodegradability of plant material, considering BMP differences as high as 44% were found. Guidelines and recommendations are given for screening plant material suitable for anaerobic digestion using the OxiTop® system.

The use of antibiotics for growth promotion and disease treatment by the commercial swine industry has led to high proportions of multiple antibiotic-resistant enteric bacteria being shed by these animals and concerns about the environmental spread of these bacteria. A study was conducted to quantify the extent of release of antibiotic-resistant E. coli from swine farms into groundwater. Four study sites, two swine farms and two reference sites (crop farms), with known groundwater flow paths were screened for E. coli four times over the course of one and a half years. A total of 100 biochemically-confirmed E. coli were collected from the four sites. There were statistically significantly higher E. coli levels at the two swine farm sites than at the reference sites. The bacterial isolates were tested for antibiotic resistance using a panel of 17 drugs that are typical of human and veterinary use. There were 19 and 71 E. coli isolates from swine farms #1 and #2, respectively, with mos...