shefali malik

Gagging is a normal physiological reflex action to restrict the entry of any foreign body through the oral cavity. Gagging is a physiological process, but sometimes it is precipitated by some other factors like while making impression of the dentulous or edentulous patient, patient may gag by the sensation of touch of impression tray or by the impression material, sometimes gag precipitates by just watching other person gagging during any dental procedure.

Aim The aim of this study was to evaluate the distribution of stresses in osseointegrated crestal and basal implant in zygomatic region of maxilla and to identify the preferable implant option for better stress distribution. Material and Method The present in vitro study was performed to evaluate stress patterns in bone around basal and crestal dental implant under axial and oblique loading in maxillary zygomatic region with the help of a finite element analysis (FEA). To conduct this study, the following materials were used: computer software ANSYS, basal implants with dimensions 3.7 × 10 mm, and crestal implants with dimensions 3.7 x 10 mm. The amount of load transferred on the bone adjacent to the implant in an axial and transverse load of 100 N at 0 and 45 degrees, respectively, was placed on both types of implants. A three-dimensional (3D) scanner was use to generate 3D simulated model of basal and crestal implants. FEA modelling was generated that replicated the zygomatico max...

Purpose: The purpose of this in vitro study was to evaluate marginal fit of cobalt- chromium (Co-Cr) copings fabricated by direct metal laser sintering system (DMLS) and conventional lost-wax technique (LW). Materials and method: Forty tooth preparations were carried out over extracted mandibular molars. They were divided into two groups A and B of 20 each. For group A Co-Cr copings were fabricated by direct metal laser sintering (DMLS) and for group B by lost wax technique (LW). Glass –ionomer cement (GIC) was used to tack the copings over their preparations. Marginal fit was then evaluated directly under the stereomicroscope. Results: The mean marginal gap of group A was 27.9 ± 2.4 μm and group B was 40.4 ±6 μm. Statistical analysis using t - test showed highly significant difference (P>.05) between the marginal mean of the DMLS (group A) compared to LW (group B). Conclusion: The DMLS copings demonstrated superior marginal fit compared to that of conventional Co-Cr casted copings.

Fixed prosthetic option is the most accepted treatment desired by the patient in modern times. Malpositioned implant presents a challenge, especially during prosthetic phase. The prosthetic achievement of various complex cases can be done by following appropriate procedure; one of which has been discussed in this report. The use of transmucosal abutment with castable abutment is successful treatment option for complex malposed single dental implant.

Introduction Luting cements are susceptible to attack by moisture during the initial setting period that can result in an increased solubility. The aim of this in vitro study was to evaluate the solubility of different permanent and temporary dental luting cements in artificial saliva of different pH values at different time intervals. Materials and Methods Eight commercial luting cements were used. Out of which five were permanent cements (Rely X lute2, zinc phosphate cement, zinc polycarboxylate cement, Rely X U-200, GC GIC) and three temporary cements (ZOE, Oratemp NE, Temposil). A total of 200 samples were made into 25 specimens of each cement (five samples for each study solution group). The samples were made of dimension 20 mm × 1.5 mm in the metal mold. Once the cements were set, they were removed and after 3 minutes of removal they were placed in the incubator at 37°C ± 1 for 1 hour. Specimens of each cement type were separated into five groups for evaluation and comparison ...

Aim and Objective The main aim of this study was to evaluate the effect of three different types of pattern materials on the vertical marginal accuracy of complete cast crown. Material and Methods Three groups of 20 specimens each were made based on three pattern materials, that is, blue inlay wax, autopolymerizing acrylic resin, and light cure pattern resin. Castings were made and examined using stereo microscope for vertical marginal discrepancy. Results The result showed that the highest mean gap was noticed in the castings fabricated using inlay type B pattern wax followed by the castings fabricated using autopolymerizing resin and the least mean gap was observed in the castings fabricated using light cure modeling material. Conclusion It was concluded from this study that the use of light cure modeling material to make patterns for casting with lost wax technique is best recommended than inlay type B pattern and autopolymerizing resin.

Aim The aim of this study was to evaluate the distribution of stresses in osseointegrated crestal and basal implant in zygomatic region of maxilla and to identify the preferable implant option for better stress distribution. Material and Method The present in vitro study was performed to evaluate stress patterns in bone around basal and crestal dental implant under axial and oblique loading in maxillary zygomatic region with the help of a finite element analysis (FEA). To conduct this study, the following materials were used: computer software ANSYS, basal implants with dimensions 3.7 × 10 mm, and crestal implants with dimensions 3.7 x 10 mm. The amount of load transferred on the bone adjacent to the implant in an axial and transverse load of 100 N at 0 and 45 degrees, respectively, was placed on both types of implants. A three-dimensional (3D) scanner was use to generate 3D simulated model of basal and crestal implants. FEA modelling was generated that replicated the zygomatico max...

The conventional crestal implants are used only when there is adequate jawbone height and width. Results of conventional implants are good in patients with healthy bone at the time of treatment, but prognosis gets deteriorated when surgical augmentation of bone is included with implant placement. These augmentation procedures have surgical risks and are costlier to the patients. Patients with atrophied jawbones are given no treatment, until crestal implants are seen as the last option. In this article, the indications for basal implants and functional differences between basal implants and crestal implants have been discussed.Patients with extreme jawbone atrophy do not benefit from crestal implants. The basal bone is the (cortical) osseous tissue of the mandible and maxilla, and lies below the alveolar process, which has a relatively strong and no resorbing framework.Basal osseointegrated and basal cortical screw (BCS) are two types of implants designed to take anchorage from the c...