1
Lint Roller
liewluck
//Getty Images
If your screens are not especially dirty, try a lint roller. You can pick up loose dirt and dust without going through the trouble of detaching the screen. Try a smaller lint roller for easier access to small crevices.
Shop Lint Rollers
2
Mr. Clean Magic Eraser
Getty Images
If your lint roller doesn't pick up all dust and dirt from your screens, try a Magic Eraser. Wet the foam and begin scrubbing the screen lightly enough that you do not stretch or damage it. We recommend the extra-strength eraser, as it will withstand prolonged scrubbing on a rougher surface. You can take on this task without detaching the screen.
Shop Magic Erasers
3
Vacuum
Getty Images
Using a vacuum is probably the easiest way to get rid of loose dirt and grime. Use a soft bristle attachment so you don't damage or stretch your screens. To keep things nice and clean, add this chore to your monthly cleaning routine. For a deeper clean, try detaching the screens and laying them on a drop cloth to give a full once over with a vacuum.
Advertisement - Continue Reading Below
4
Soapy Water or Vinegar Bath
Getty Images
When your screens have stubborn, caked-on grime, it's best to give them a bath. This is best done on a sunny day when screens can be left outside to dry.
- Remove your screens from the windows and lay them outside. If you have a larger number of screens, it may be a good idea to label them with masking tape and a marker to make re-installation easier later on.
- Mix 1/4 cup of all-purpose dish soap with 1/2 gallon of water. You can also do this with 1/4 cup of household vinegar instead of dish soap if you prefer.
- Lift the screen into an upright position and gently wash soapy water over the screen with a sponge or dish cloth.
- Before the screen dries, hose down the screen on the lowest pressure setting to rinse off any residual soap. If your hose does not have an option for a light spray of water, rinsing the screens in the shower is a great substitute.
- Lay the screens out to dry for a few hours. Once they are fully dry, you can vacuum them with the soft bristle attachment to make sure any loose dirt is picked up before you put them back in their place.
5
Toothbrush
Getty Images
For really tough dirt, give your screens a soapy bath and add a slightly harder bristle brush like a toothbrush to really scrape off grime. Try not to press too hard on the screen because you don't want to bend it out of shape. It may be tedious, but a toothbrush can break through any dirt stuck in those tiny holes, nooks, and crevices.
6
Pressure Washing
Getty Images
Pressure-washing screens is best used when they are not detachable, and only take this on if your pressure washer has a low intensity setting. If it doesn't, try washing your screens down with a hose. A nozzle attachment with multiple settings will go a long way in erasing grime.
Advertisement - Continue Reading Below
7
Rusty Screens Remedy
Getty Images
Weather is rough on outdoor metal screens, but there is a cleaning solution:
- Pour household vinegar over the rusted areas and allow to sit for a couple hours. This is more easily done if you can detach the screen, but if you can't, periodically rub vinegar over the area with a cloth over a couple hours.
- With clean water and a bristle brush, scrub gently over the rusted areas. This will take patience but should get rid of most of the rust.
- If rust persists, try mixing up a bit of baking soda and water. It should be the consistency of toothpaste. Using the brush, scrub the mixture into the rusted areas until it starts to come clean. Make sure to rinse the screen thoroughly when finished and wipe dry with a cloth!
Advertisement - Continue Reading Below
Advertisement - Continue Reading Below
Advertisement - Continue Reading Below