A radiator removes heat from the engine through thermal heat exchange using coolant as a conductor and is usually located in the front of the vehicle under the hood. A cooling system consists of many parts including a thermostat, water pump and cooling hoses. A radiator is manufactured with a thin aluminum core coupled with plastic tanks which are prone to coolant leaks. When removing the radiator leaving the cooling fans attached and transferring them onto the new radiator while on the bench could be more efficient. While the radiator is removed use a garden hose to clean the area including the air conditioner condenser.
With the engine cold (only) locate and remove the radiator cap, a small amount of pressure maybe released when loosened.
Once the cap has been turned counter clockwise while pushing downward, lift the cap from the radiator.
Remove lower shield mounting bolts while removing shielding. This will allow access the bottom of the radiator.
After removing the lower shielding, locate the radiator drain plug and start to loosen.
Coolant will start draining from the radiator drain. Use a catch basin to collect the coolant to be recycled.
Remove the mounting bolts or clips holding the air intake and the plastic fascia over the radiator and lift the cover from the engine bay. Also move the air intake away from the work area.
Locate and remove coolant reservoir mounting bolts.
Remove the coolant overflow tube from the radiator neck. This hose can become stuck so a twist could be necessary. Once free, remove the coolant reservoir from the engine bay.
Please watch this video of the job being done, then continue down the guide to glean additional helpful information.
Locate and disconnect the cooling fan electrical connector.
Using a hose clamp removal tool or channel locks loosen the upper radiator hose clamp.
Grasp the upper hose and twist to remove.
Next, remove all cooling fan mounting bolts.
After the cooling fan mounting bolts have been removed, gently lift out the fan and housing, sometimes the cooling fan will need to be removed with the radiator.
Using a wrench loosen and remove the automatic transmission cooler lines from the radiator, there should be two of them, this is for automatic transmission cars only.
Once the transmission lines have been removed, locate the radiator mounting bolts and remove.
After the radiator mounting bolts have been removed, move the radiator forward to remove the air conditioner condenser from the radiator. This condenser will remain in the engine bay so vacuum down and recharge is not necessary. Some condensers are held independently of the radiator in which case you can skip this step.
Using a hose clamp removal tool or channel locks loosen and remove the lower radiator hose. A small amount of coolant might leak from the hose, be ready with a fluid catch basin.
Double check all hoses, mounting bolts and clips have been removed, gently lift the radiator from the engine bay.
Once the old radiator has been removed, un-box the new radiator and match it up to the old radiator. Look for mounting clips. mounts and transmission lines that might need to be transferred over.
Gently install the new radiator. Be careful not to damage the radiator core while installation is occurring.
Once these steps have been completed, reverse the order to reinstall the new radiator. Refill the system with coolant and start the engine, allow the engine to warm up completely while adding coolant until the thermostat opens.
Reinstall the radiator cap by pushing down and turning it clockwise until tight, also check the coolant reservoir fluid level. After installing the radiator cap, recheck the system for leaks, also recheck the coolant reservoir after a couple of days of operation. Once driving the vehicle, check the temperature gauge for overheating.
Our certified technicians are ready to answer radiator replacement questions for free. We hope you saved money and learned from this guide. We are creating a full set of car repair guides. Please subscribe to our 2CarPros YouTube channel and check back often for new videos which are uploaded regularly.