Control Panel Features; Ultra Ice/Filter Reset; Lock Controls/Lock; Adjusting Control Settings - Kenmore 795.5101 Series Use & Care Manual

Side by side
Table of Contents

Advertisement

ULTRA ICE
Press this button once to activate increased ice making
function. The ULTRA ICE icon on the display panel will
illuminate when activated. The Ultra Ice function runs the
freezer compartment at the coldest settings for a 24 hour
period to increase ice making. Press the button again to
cancel the Ultra Ice function.
LOCK CONTROLS / LOCK
Type 1
Type 2
The LOCK CONTROLS/LOCK button deactivates the
temperature controls and dispenser functions.
Press and hold this button for 3 seconds or until the
Lock indicator light is lit.
To disable the Lock function, press and hold the
LOCK CONTROLS/LOCK button for 3 seconds or until the
Lock indicator light is off.
FILTER RESET
• There is a replacement indicator light for the water
filter cartridge on the dispenser.
• Water filter usually needs replacement once every six
months.
• Filter light comes on and blinks to let you know when to
replace filter.
• After replacing filter, press and hold Filter Reset button
for 3 seconds to turn off filter status light.
USING YOUR REFRIGERATOR
18

ADJUSTING CONTROL SETTINGS

Give the refrigerator time to cool down completely
before making final adjustments. It is best to wait 24
hours before doing this. The initial settings mentioned in
CONTROL PANEL FEATURES section should be
correct for normal household refrigerator use.
The refrigerator control functions as the thermostat for
the entire appliance (refrigerator and freezer sections).
The colder the setting,
the longer the
run to keep the temperature colder. The freezer control
adjusts the cold air flow from the freezer to the
refrigerator. Setting the freezer control to a lower
temperature keeps more cold air in the freezer
compartment to make it colder.
If you need to adjust temperatures in the refrigerator or
freezer, start by adjusting the refrigerator. Then wait 24
hours before checking the freezer temperature. If it is
too warm or too cold, then adjust the freezer control.
Use the settings listed in the chart below as a guide.
Always remember to wait at least 24 hours between
adjustments.
CONDITION/
REASON :
REFRIGERATOR section too
warm
– Door opened often
– Large amount of food added
Room temperature very warm
FREEZER section too
warm/ice not made fast enough
– Door opened often
– Large amount of food added
Very cold room temperature
(
compressor does not cycle
often enough)
– Heavy ice usage
– Air vents blocked by items
REFRIGERATOR section too
cold
Controls not set correctly for
your conditions
FREEZER section too cold
Controls not set correctly for
your conditions
compressor will
RECOMMENDED
ADJUSTMENT :
Press the
REFRIGERATOR
control to next coldest
level, wait 24 hours
Press the FREEZER
control to next coldest
level, wait 24 hours
Move items out of
airstream
Set REFRIGERATOR
control to next warmer
level, wait 24 hours
Set FREEZER
control to next warmer
level, wait 24 hours

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

795.5102 series

Table of Contents