Skip to content

DrPsychick/docker-dnsmasq

Repository files navigation

Multi arch docker image, configurable through ENV, based on alpine - serving as local DHCP and/or DNS server

Docker image CircleCI license DockerHub pulls DockerHub stars GitHub stars Contributors

GitHub issues GitHub closed issues GitHub pull requests GitHub closed pull requests Paypal GitHub Sponsor

NO LONGER based on andyshinn/dnsmasq docker image, as his images are outdated :(

Purpose:

  • make it fully configurable through environment variables
  • use one image to run them all
  • run stateless, environment configured containers (see https://12factor.net/)
  • use primarily to setup DNS/DHCP for simple/home environments

Usage

Try it in 3 steps

1 create your own dnsmasq.env

docker run --rm -it drpsychick/dnsmasq:latest --test
docker run --rm -it drpsychick/dnsmasq:latest --export > dnsmasq.env

2 run it

Run in a separate teminal

docker run --rm -it --cap-add NET_ADMIN --env-file dnsmasq.env --name dnsmasq-1 drpsychick/dnsmasq:latest -k -q --log-facility=-

3 test it

# test DNS and DHCP
container_ip=$(docker inspect dnsmasq-1 -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}')
docker_interface=$(docker network inspect bridge -f '{{index .Options "com.docker.network.bridge.name"}}')
nslookup google.com $container_ip

sudo ip link add test0 link docker0 type macvlan mode bridge
sudo dhclient -1 -d -s $container_ip test0
sudo ip link del test0 link docker0 type macvlan mode bridge

If that ruins your routing because of a new default gateway (check route -n):

sudo route del -net 172.17.10.0/24 gw 172.10.10.1 dev $docker_interface

Use case: run in local network

Some additional work is needed in order to run the docker container with an IP from your local subnet and to serve requests for your subnet. If you don't need DHCP, you can skip most part of it.

Further reading:

http://blog.oddbit.com/2014/08/11/four-ways-to-connect-a-docker/ https://docs.docker.com/engine/userguide/networking/get-started-macvlan/#macvlan-bridge-mode-example-usage https://blog.docker.com/2016/12/understanding-docker-networking-drivers-use-cases/

Important:

DHCP will only work if the DHCP range is on the interface it runs on In other words: running DHCP on the ip of the docker container will not work, it needs to have an IP on the subnet it will serve DHCP requests on

Example:

  • 192.168.1.253 IP of the DNS/DHCP server
  • 192.168.1.1 IP of the gateway
  • 192.168.1.110-120 is an unused range of IPs
  • eth1 is the network device on the local subnet

dnsmasq.env:

DMQ_DNS_HOST1=gateway,gateway.local,192.168.1.1
DMQ_DHCP_GATEWAY=dhcp-option=3,192.168.1.1
DMQ_DHCP_RANGES=dhcp-range=192.168.1.110,192.168.1.120,24h
DMQ_DHCP_DNS=dhcp-option=6,192.168.1.253,8.8.8.8,8.8.4.4

test configuration: docker run --rm -it --env-file dnsmasq.env drpsychick/dnsmasq:latest --test

Network

To run the container with an IP from the local subnet, we need the "macvlan" driver. And in order to be able to interact with the container even from the host, we need to create a virtual interface.

# create linked interface mac0 and use this instead of the parent eth1
sudo ip link add mac0 link eth1 type macvlan mode bridge
sudo ip addr flush dev eth1
sudo dhclient mac0

# create macvlan network with our subnet
docker network create --driver macvlan --subnet 192.168.1.0/24 --gateway 192.168.1.1 -o parent=mac0 local-net

Run in a separate shell:

docker run --rm -it --net local-net --ip 192.168.1.253 --cap-add NET_ADMIN --env-file dnsmasq.env --publish 53:53 --publish 53:53/udp --publish 67:67/udp --name dnsmasq-1 drpsychick/dnsmasq:latest -k -q --log-facility=-

Test it

nslookup google.de 192.168.1.253

sudo ip link add mac1 link eth1 type macvlan mode bridge
sudo dhclient -1 -d -s 192.168.1.253 mac1
sudo ip link del mac1

All good, now lets see it in production:

# run it
# Same "run" command as above, but with "-d" and "--restart always" instead of "--rm -it" (run as daemon)
docker run -d --net local-net --ip 192.168.1.253 --cap-add NET_ADMIN --env-file dnsmasq.env --restart always --publish 53:53 --publish 53:53/udp --publish 67:67/udp --name dnsmasq-1 drpsychick/dnsmasq:latest -k -q --log-facility=-

# watch it
docker attach --sig-proxy=false dnsmasq-1

The simple way

For services other than DHCP you still have to some manual tweaking, but its much easier to do

Try this:

sudo ip addr add 192.168.1.253/32 dev eth1
docker run ... --publish 192.168.1.253:53:53 ... (for every port)

Credits

Automated build inspired by