"1 mole of Fe2O3" Can i say 1 molecule ? Because im new at this amu/mole thing

No, because a mole isn't a direct measurement. Mole is a term like dozen - a dozen eggs, a dozen cows, no matter what you use dozen with, it always means twelve of whatever the dozen is of. So a mole is like that, except with particles. There are always 6.022*10^23 atoms in a mole, no matter if that mole is of iron, or hydrogen, or helium.

How did you manage to get [2]molNaOH/1molH2SO4. How will you know if you're suppose to place 3 there? Or 4?

Go back to the balanced equation. 2 NaOH + H2SO4 -> 2 H2O + Na2SO4 Look at the left side (the reactants). You have 2 NaOH's, and 1 H2SO4's. The ratio of NaOH to H2SO4 is 2:1. So you get 2 moles of NaOH for every 1 mole of H2SO4. I hope that answered your question!

Where did you get the value of the molecular weight of 98.09 g/mol for H2SO4?? Are we suppose to know that?

To get the molecular weight of H2SO4 you have to add the atomic mass of the constituent elements with the appropriate coefficients. Here the molecular weight of H2SO4 = (2 * atomic mass of H) + (atomic mass of S) + (4 * atomic mass of O) Hope that helped!

Is mol a version of mole? I just see this a lot on the board when my chem teacher is talking about moles.

Mole is the SI unit for "amount of substance", just like kilogram is, for "mass". And like kilograms are represented by the symbol 'kg', moles are represented by the symbol 'mol'. That's it! :)

Can someone tell me what did we do in step 1? why did we multiply the given mass of HeSO4 by 1mol H2SO4/ 98.09 g HeSO4?

That is converting the grams of H2SO4 given to moles of H2SO4. When we do these calculations we always need to work in moles. Why moles? Because 1 gram of hydrogen has more atoms than 1 gram of sulfur, for example. But 1 mole of hydrogen has exactly the same number of atoms as 1 mole of sulfur.

hi! i am new to this stoichiometry,i am a bit confused about the the problem solving tip you gave in the article.

What it means is make sure that the number of atoms of each element on the left side of the equation is exactly equal to the numbers on the right side. The equation is then balanced. If the numbers aren't the same, left and right, then the stoichiometric coefficients need to be adjusted until the equation is balanced - earlier videos showed how this was done. When counting up numbers of atoms, you need to take account of both the atom subscripts and the stoichiometric coefficients. For example, Fe2O3 contains two iron atoms and three oxygen atoms. However, if it was 2Fe2O3, then this would be four iron atoms and six oxygen atoms, because the stoichiometric coefficient of 2 multiplies everything.

Can someone explain step 2 please why do you use the ratio?

We use the ratio to find the number of moles of NaOH that will be used. If the ratio of 2 compounds of a reaction is given and the mass of one of them is given, then we can use the ratio to find the mass of the other compound. For eg. in the oxidation of magnesium (Mg+O2 -> 2MgO), we get that O2 and MgO are in the ratio 1:2. So, if 3.16 (completely random number) moles of oxygen is involved, we know that 6.32 (2 x 3.16) moles of MgO will be formed. This info can be used to tell how much of MgO will be formed, in terms of mass. Hope this helps.

How do you get moles of NaOH from mole ratio in Step 2?

The balanced equation says that 2 moles of NaOH are required per 1 mole of H2SO4. We have 3.16E-2 moles of H2SO4 so we need 2x that number as moles of NaOH Hence 2 x 3.16E-2 = 6.32E-2 moles of NaOH.

What is the purpose of crossing out some of the units in these stoichiometry calculations?

It's to figure out what the units are for your answer. for example. Let's say you have 3 moles of carbon. And you want to find the mass of your sample. The molar mass of carbon is about 12 g/mol. so 3 mol*12 g/mol. You cross out the moles on both sides of the fraction to give you grams for your units. So 36 Grams of carbon.

Main content

Course: Chemistry library > Unit 3

Lesson 2: Stoichiometry

Stoichiometry

Google Classroom

Introduction

You might use stoichiometry skills to double a cookie recipe! Image credit: "Chocolate Chip Cookies" by Kimberley Vardeman on Wikimedia Commons, CC BY 2.0.

A balanced chemical equation is analogous to a recipe for chocolate chip cookies. It shows what reactants (the ingredients) combine to form what products (the cookies). It also shows the numerical relationships between the reactants and products (such as how many cups of flour are required to make a single batch of cookies).

These numerical relationships are known as reaction stoichiometry, a term derived from the Ancient Greek words stoicheion ("element") and metron ("measure"). In this article, we'll look at how we can use the stoichiometric relationships contained in balanced chemical equations to determine amounts of substances consumed and produced in chemical reactions.

Balanced equations and mole ratios

A common type of stoichiometric relationship is the mole ratio, which relates the amounts in moles of any two substances in a chemical reaction. We can write a mole ratio for a pair of substances by looking at the coefficients in front of each species in the balanced chemical equation. For example, consider the equation for the reaction between iron(III) oxide and aluminum metal:

{Fe}_{2} O_{3} (s) + 2 Al (s) \to 2 Fe (l) + {Al}_{2} O_{3} (s)

The coefficients in the equation tell us that

1

mole of

Fe_{2} O_{3}

reacts with

2

moles of

Al

, forming

2

moles of

Fe

and

1

mole of

Al_{2} O_{3}

. We can write the relationship between the

Fe_{2} O_{3}

and the

Al

as the following mole ratio:

1 {mol Fe}_{2} O_{3} : 2 mol Al

Using this ratio, we could calculate how many moles of

Al

are needed to fully react with a certain amount of

{Fe}_{2} O_{3}

, or vice versa. In general, mole ratios can be used to convert between amounts of any two substances involved in a chemical reaction. To illustrate, let's walk through an example where we use a mole ratio to convert between amounts of reactants.

Example: Using mole ratios to calculate mass of a reactant

Consider the following unbalanced equation:

NaOH (a q) + H_{2} SO_{4} (a q) \to H_{2} O (l) + Na_{2} SO_{4} (a q)

How many grams of $NaOH$ ‍ are required to fully consume $3.10$ ‍ grams of $H_{2} SO_{4}$ ‍ ?

First things first: we need to balance the equation! In this case, we have

1

Na

atom and

3

H

atoms on the reactant side and

2

Na

atoms and

2

H

atoms on the product side. We can balance the equation by placing a

2

in front of

NaOH

(so that there are

2

Na

atoms on each side) and another

2

in front of

H_{2} O

(so that there are

6

O

atoms and

4

H

atoms on each side). Doing so gives the following balanced equation:

2 NaOH (a q) + H_{2} SO_{4} (a q) \to 2 H_{2} O (l) + Na_{2} SO_{4} (a q)

Now that we have the balanced equation, let's get to problem solving. To review, we want to find the mass of

NaOH

that is needed to completely react

3.10

grams of

H_{2} SO_{4}

. We can tackle this stoichiometry problem using the following steps:

Step 1: Convert known reactant mass to moles

In order to relate the amounts

H_{2} SO_{4}

and

NaOH

using a mole ratio, we first need to know the quantity of

H_{2} SO_{4}

in moles. We can convert the

3.10

grams of

H_{2} SO_{4}

to moles using the molar mass of

H_{2} SO_{4}

(

98.08 g / mol

3.10 {g H}_{2} {SO}_{4} \times \frac{1 {mol H}_{2} {SO}_{4}}{98.08 {g H}_{2} {SO}_{4}} = 3.16 \times 10^{- 2} {mol H}_{2} {SO}_{4}

Step 2: Use the mole ratio to find moles of other reactant

Now that we have the quantity of

H_{2} SO_{4}

in moles, let's convert from moles of

H_{2} SO_{4}

to moles of

NaOH

using the appropriate mole ratio. According to the coefficients in the balanced chemical equation,

2

moles of

NaOH

are required for every

1

mole of

H_{2} SO_{4}

, so the mole ratio is

\frac{2 mol NaOH}{1 {mol H}_{2} {SO}_{4}}

Multiplying the number of moles of

H_{2} SO_{4}

by this factor gives us the number of moles of

NaOH

needed:

3.16 \times 10^{- 2} {mol H}_{2} {SO}_{4} \times \frac{2 mol NaOH}{1 {mol H}_{2} {SO}_{4}} = 6.32 \times 10^{- 2} mol NaOH

Notice how we wrote the mole ratio so that the moles of

H_{2} SO_{4}

cancel out, resulting in moles of

NaOH

as the final units. To learn how units can be treated as numbers for easier bookkeeping in problems like this, check out this video on dimensional analysis.

Step 3: Convert moles of other reactant to mass

We were asked for the mass of

NaOH

in grams, so our last step is to convert the

6.32 \times 10^{- 2}

moles of

NaOH

to grams. We can do so using the molar mass of

NaOH

(

40.00 g / mol

6.32 \times 10^{- 2} mol NaOH \times \frac{40.00 g NaOH}{1 mol NaOH} = 2.53 g NaOH

So, $2.53 g$ ‍ of $NaOH$ ‍ are required to fully consume $3.10$ ‍ grams of $H_{2} SO_{4}$ ‍ in this reaction.

Shortcut: We could have combined all three steps into a single calculation, as shown in the following expression:

\begin{aligned} \underset{⏟}{3.10 {g H}_{2} {SO}_{4} \times \frac{1 {mol H}_{2} {SO}_{4}}{98.08 {g H}_{2} {SO}_{4}}} \times \underset{⏟}{\frac{2 mol NaOH}{1 {mol H}_{2} {SO}_{4}}} \times \underset{⏟}{\frac{40.00 g NaOH}{1 mol NaOH}} = 2.53 g NaOH \\ Step 1 Step 2 Step 3 \\ {Find mol of H}_{2} {SO}_{4} Use mole ratio Find g of NaOH \end{aligned}

Be sure to pay extra close attention to the units if you take this approach, though!

Summary

A balanced chemical equation shows us the numerical relationships between each of the species involved in the chemical change. We can use these numerical relationships to write mole ratios, which allow us to convert between amounts of reactants and/or products (and thus solve stoichiometry problems!).

Running a chemical reaction is like making cookies. Hopefully your lab bench is cleaner than this kitchen counter, though! Image credit: Congerdesign on Pixabay, Pixabay License.

To learn about other common stoichiometric calculations, check out this exciting sequel on limiting reactants and percent yield!

This article was adapted from the following articles:

"Chemical Reactions" from UC Davis ChemWiki, CC BY-NC-SA 3.0
"Stoichiometry and Balancing Reactions" from UC Davis ChemWiki, CC BY-NC-SA 3.0
"Reaction Stoichiometry" from Boundless Chemistry, CC BY-SA 4.0

The modified article is licensed under a CC BY-NC-SA 4.0 license.

Additional references:

Zumdahl, S. S., and Zumdahl, S. A. (2014). Stoichiometric Calculations: Amounts of Reactants and Products. In Chemistry (9th ed., pp. 108–114). Belmont, CA: Brooks/Cole.

Want to join the conversation?

Sort by:

jareddarrell

Posted 8 years ago. Direct link to jareddarrell's post “"1 mole of Fe2O3" Can i s...”

"1 mole of Fe2O3" Can i say 1 molecule ? Because im new at this amu/mole thing

Button navigates to signup pageComment on jareddarrell's post “"1 mole of Fe2O3" Can i s...”

(37 votes)
Answer
- Eric Xu
  
  Posted 8 years ago. Direct link to Eric Xu's post “No, because a mole isn't ...”
  
  No, because a mole isn't a direct measurement. Mole is a term like dozen - a dozen eggs, a dozen cows, no matter what you use dozen with, it always means twelve of whatever the dozen is of. So a mole is like that, except with particles. There are always 6.022*10^23 atoms in a mole, no matter if that mole is of iron, or hydrogen, or helium.
  
  Comment on Eric Xu's post “No, because a mole isn't ...”
  
  (132 votes)
Kristine Modina

Posted 8 years ago. Direct link to Kristine Modina's post “How did you manage to get...”

How did you manage to get [2]molNaOH/1molH2SO4.
How will you know if you're suppose to place 3 there? Or 4?

Button navigates to signup pageButton navigates to signup page

(8 votes)
Answer
- Pranav A
  
  Posted 8 years ago. Direct link to Pranav A's post “Go back to the balanced e...”
  
  Go back to the balanced equation.
  2 NaOH + H2SO4 -> 2 H2O + Na2SO4
  Look at the left side (the reactants). You have 2 NaOH's, and 1 H2SO4's. The ratio of NaOH to H2SO4 is 2:1. So you get 2 moles of NaOH for every 1 mole of H2SO4. I hope that answered your question!
  
  Button navigates to signup page
  
  (35 votes)
Clarisse

Posted 6 years ago. Direct link to Clarisse's post “Where did you get the val...”

Where did you get the value of the molecular weight of 98.09 g/mol for H2SO4?? Are we suppose to know that?

Button navigates to signup pageComment on Clarisse's post “Where did you get the val...”

(6 votes)
Answer
- Dharmishta Yadav
  
  Posted 3 years ago. Direct link to Dharmishta Yadav's post “To get the molecular weig...”
  
  To get the molecular weight of H2SO4 you have to add the atomic mass of the constituent elements with the appropriate coefficients.
  Here the molecular weight of H2SO4 = (2 * atomic mass of H) + (atomic mass of S) + (4 * atomic mass of O)
  Hope that helped!
  
  Button navigates to signup page
  
  (21 votes)
猫

Posted 7 years ago. Direct link to 猫's post “Is mol a version of mole?...”

Is mol a version of mole? I just see this a lot on the board when my chem teacher is talking about moles.

Button navigates to signup pageComment on 猫's post “Is mol a version of mole?...”

(6 votes)
Answer
- Arya Kekatpure
  
  Posted 4 years ago. Direct link to Arya Kekatpure's post “Mole is the SI unit for "...”
  
  Mole is the SI unit for "amount of substance", just like kilogram is, for "mass". And like kilograms are represented by the symbol 'kg', moles are represented by the symbol 'mol'. That's it! :)
  
  Button navigates to signup page
  
  (15 votes)
jeej91

Posted 6 years ago. Direct link to jeej91's post “Can someone tell me what ...”

Can someone tell me what did we do in step 1? why did we multiply the given mass of HeSO4 by 1mol H2SO4/ 98.09 g HeSO4?

Button navigates to signup pageComment on jeej91's post “Can someone tell me what ...”

(4 votes)
Answer
- Ryan W
  
  Posted 6 years ago. Direct link to Ryan W's post “That is converting the gr...”
  
  That is converting the grams of H2SO4 given to moles of H2SO4. When we do these calculations we always need to work in moles.
  Why moles? Because 1 gram of hydrogen has more atoms than 1 gram of sulfur, for example. But 1 mole of hydrogen has exactly the same number of atoms as 1 mole of sulfur.
  
  Button navigates to signup page
  
  (10 votes)
Fahad Rafiq

Posted 7 years ago. Direct link to Fahad Rafiq's post “hi! i am new to this stoi...”

hi!
i am new to this stoichiometry,i am a bit confused about the the problem solving tip you gave in the article.

Button navigates to signup pageComment on Fahad Rafiq's post “hi! i am new to this stoi...”

(4 votes)
Answer
- RogerP
  
  Posted 7 years ago. Direct link to RogerP's post “What it means is make sur...”
  
  What it means is make sure that the number of atoms of each element on the left side of the equation is exactly equal to the numbers on the right side. The equation is then balanced.
  
  If the numbers aren't the same, left and right, then the stoichiometric coefficients need to be adjusted until the equation is balanced - earlier videos showed how this was done.
  
  When counting up numbers of atoms, you need to take account of both the atom subscripts and the stoichiometric coefficients. For example, Fe2O3 contains two iron atoms and three oxygen atoms. However, if it was 2Fe2O3, then this would be four iron atoms and six oxygen atoms, because the stoichiometric coefficient of 2 multiplies everything.
  
  Button navigates to signup page
  
  (5 votes)
sakinanoor

Posted a year ago. Direct link to sakinanoor's post “What is the purpose of cr...”

What is the purpose of crossing out some of the units in these stoichiometry calculations?

Button navigates to signup pageButton navigates to signup page

(1 vote)
Answer
- Christopher
  
  Posted a year ago. Direct link to Christopher's post “It's to figure out what t...”
  
  It's to figure out what the units are for your answer. for example. Let's say you have 3 moles of carbon. And you want to find the mass of your sample. The molar mass of carbon is about 12 g/mol. so 3 mol*12 g/mol. You cross out the moles on both sides of the fraction to give you grams for your units. So 36 Grams of carbon.
  
  Button navigates to signup page
  
  (7 votes)
THE UWUDON

Posted 4 years ago. Direct link to THE UWUDON's post “Can someone explain step ...”

Can someone explain step 2 please why do you use the ratio?

Button navigates to signup pageButton navigates to signup page

(2 votes)
Answer
- Kanav Bhalla
  
  Posted 4 years ago. Direct link to Kanav Bhalla's post “We use the ratio to find ...”
  
  We use the ratio to find the number of moles of NaOH that will be used. If the ratio of 2 compounds of a reaction is given and the mass of one of them is given, then we can use the ratio to find the mass of the other compound.
  For eg. in the oxidation of magnesium (Mg+O2 -> 2MgO), we get that O2 and MgO are in the ratio 1:2. So, if 3.16 (completely random number) moles of oxygen is involved, we know that 6.32 (2 x 3.16) moles of MgO will be formed. This info can be used to tell how much of MgO will be formed, in terms of mass.
  Hope this helps.
  
  Button navigates to signup page
  
  (3 votes)
Roronoa_Zoro

Posted a year ago. Direct link to Roronoa_Zoro's post “Is there a simpler way to...”

Is there a simpler way to to this?

Button navigates to signup pageComment on Roronoa_Zoro's post “Is there a simpler way to...”

(0 votes)
Answer
- Richard
  
  Posted a year ago. Direct link to Richard's post “This is the simple way.”
  
  This is the simple way.
  
  Button navigates to signup page
  
  (11 votes)
Vaishnavi Dumbali

Posted 6 years ago. Direct link to Vaishnavi Dumbali's post “How do you get moles of N...”

How do you get moles of NaOH from mole ratio in Step 2?

Button navigates to signup pageButton navigates to signup page

(2 votes)
Answer
- Ryan W
  
  Posted 6 years ago. Direct link to Ryan W's post “The balanced equation say...”
  
  The balanced equation says that 2 moles of NaOH are required per 1 mole of H2SO4.
  
  We have 3.16E-2 moles of H2SO4 so we need 2x that number as moles of NaOH
  Hence 2 x 3.16E-2 = 6.32E-2 moles of NaOH.
  
  Comment on Ryan W's post “The balanced equation say...”
  
  (3 votes)