Silicone Coatings/Silicone Marble-Coating S-202

As temperature resistance decorative non-stick coating, it could be used on outside of aluminum non-stick cookware. Please do complete applicability test for specific use

  • Brand:

    sinograce
  • item no.:

    S-202
  • Payment:

    L/C、D/A、D/P、T/T、MoneyGram、Paypal Other
  • product origin:

    China Anhui
  • shipping port:

    Shanghai And Other Ports
inquire
Product Detail

Description

As temperature resistance decorative non-stick coating, it could be used on outside of aluminum non-stick cookware. Please do complete applicability test for specific use.


Type

Silicone coating


Key features

-Eco-friendly and PFOA free

-Showing the effect of natural marble

-Easy application process, with bright color

-It’ s workable at 200℃, good chemical resistance


Typical properties

Product model: S-202A (Primer)

                           S-202B (Dot-1)

                           S-202C (Dot-2)

Recommended dosage: 10kg primer

                                         0.5kg Dot-1: 0.5kg Dot-2

Appearance: Light brown (Primer)

                        Light yellow (Dot-1)

                        Black (Dot-2)

Solid content (%): 45±1 (Primer)

                               40±1 (Dot-1)

                               39±1 (Dot-2)

Viscosity (cp): 30~50 (Primer)

                          10~16 (Dot-1)

                          10~16 (Dot-2)

Density (g/ml): 1.20±0.20 (Primer)

                          1.25±0.20 (Dot-1)

                          1.25±0.20 (Dot-2)

pH: 8~11 (Primer)

         8~11 (Dot-1)

         8~11 (Dot-2)

Gloss (60° glossimeter): 45-55

Film thickness (μm): 15-25

Hardness: >3H (ZHONGHUA pencil)

Adhesion (1mm*1mm): Grade 1


Application

-Outside of tensile aluminum and die-casting fry pan, wok, soup pot, etc. 


Storage and handling

-Available in 20 kg/ barrel or 30 kg/ barrel

-Store products in tightly closed original containers at 5-35℃

-Shelf life: 12 months from delivery date

-According to non-dangerous goods transport


How to use

1. Requirement on pre-treatment

-Firstly, apply high-temperature degreasing, then wash with 1%~3% NaOH solution (60℃) for more than 6 minutes, dry it after water rinsing.

-Blast with 80#~120# corundum to make the surface roughness reach 2.0μ~3.0μ, pay attention to sandblast evenly;

-Wash with 1%~3% NaOH solution(60℃) for more than 6 minutes, rinse with water.

-Wash with 1%~3% hydrochloric acid solution (60℃) for more than 6 minutes, rinse with water and dry.


2. Preparation of the coating

-Dispersion of coating: the coating must be fully dispersed before operation. Rolling the coating at the speed of 300rpm with rolling machine for 10mins at least.

-Coating filtration: filtrate the coating with screen (100mesh) before using.


3. Application

-The spraying environment should be dry, well-ventilated, no smoking and fire. We suggest using dedicated spray gun, elevated tank and curing oven.

-The air compressor should be degreased, dewatered and equipped with water oil separator before using.

-Adjust atomization and oil pump capacity of the spraying gun; make sure the unit is clean and flat.

-Leveling the coating at 150~180℃ after spraying, cure it at 280℃×10min. Keep the dry film thickness at the range of 15μm~25μm.

-In spraying process, keep stirring inside of the elevated tank, the size of spraying nozzle should be between 0.8mm~ 1.3mm, the pressure is about 3.5bar.


Non-stick Coating Type

↓ ↓ ↓ Please click product model for more informations

Model Layer Thickness Curing temperature Non stick property Anti-corrosion Abrasion resistant
  Water based fluororesin non-stick coating  
PF-600 2 25-40 380-400 A A A A A A A A A A A A
PF-601 2 25-35 380-400 A A A A A A A A A A A
PF-602 2 25-40 380-400 A A A A A A A A A A A A
PF-610 3 20-35 380-420 A A A A A A A A A A A A A
PF-611 3 20-35 380-420 A A A A A A A A A A A A A
PF-612 3 20-35 380-420 A A A A A A A A A A A A A
  Water based ceramic non-stick coating  
C-104 1 30-45 280-300 A A A A A A A A A A A A A A
C-105 1 30-45 280-300 A A A A A A A A A A A A A A
C-106 2 34-50 280-300 A A A A A A A A A A A A A A
C-107 1 12-20 250-280 A A A A A A A A A A A A A A
C-108 2 34-50 280-300 A A A A A A A A A A A A A A
C-109 2 34-50 280-300 A A A A A A A A A A A A A A
  Silicone resin non-stick coating  
S-200 1 15-20 280-300 A A A A A A A A A A A A A
S-201 1 15-20 280-300 A A A A A A A A A A A A A A
S-202 1 15-20 280-300 A A A A A A A A A A A A A



send your inquiry directly to this supplier

    we will give you a quotation within 24 hours.

      Products :

      Silicone Coatings/Silicone Marble-Coating S-202
    • click here to see our contact information

related products

Copyright © 2015-2024 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com

top