class 2 ac 110v 120v dc 24 volt constant voltage 96w 100w led driver 24v
Features for 24 volt led driver
Smarts part number:SMT-024-096VW output side: 24volt 4 amp 96 watt constant voltage led driver. Input voltage range is 100-265Vac/47-63Hz. For this module, we do high PF>0.95 and high Efficiency>0.88. . It is waterproof IP67 aluminum led driver. The dimension of 100w led driver is 200*68*53mm. We give 3 years warranty. protections:Short circulit/Over load/over voltage/over temp. ETL, CE(EMC+LVD),ROHS approval. (ETL file# 5005044).
SPECIFICAION | |||||
MODEL | SMT-012-096VW | SMT-024-096VW | |||
OUTPUT | DC VOLTAGE | 12V | 24V | ||
RATED CURRENT | 8.33A | 4A | |||
CURRENT RANGE | 0~8A | 0~4A | |||
RATED POWER | 96W | 96W | |||
RIPPLE&NOISE(max) | 150mV | 150mV | |||
VOLTAGE TOLERANCE | ±0.5V | ±0.5V | |||
SETUP RISE TIME | 80ms/110V,220VAC | ||||
HOLD UP TIME(Typ.) | 60ms/110V,220VAC | ||||
INPUT | VOLTAGE RANGE | 100~265VAC | |||
FREQUENCY RANGE | 50~60Hz | ||||
POWER FACTOR(Typ.) | 0.95 | ||||
EFFICIENCY(Typ.) | ﹥87% | ||||
AC CURRENT(Typ.) | 0.92A/110VAC, 0.86A/220VAC | ||||
INRUSH CURRENT (Typ.) | COLD START 50A/110VAC, 220VAC | ||||
PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | |||
Overload | overload protected@145-160% above peak rating | ||||
Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | ||||
ENVIRONMENT | WORKING TEMP. | -30~+50℃ (Refer to output load derating curve) | |||
WORKING HUMIDITY | 20~99% RH non-condensing(Waterproof IP67) | ||||
STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | ||||
SAFETY&EMC | SAFETY STANDARDS | CE ETL Mark(LVD) | |||
WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC IP-GND:1.5KVAC | ||||
EMC Test Standards | EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006 | ||||
EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006 | |||||
NOTE | 1.All parameters NOT specially mentoned are measured at 110VAC,220VAC input,rated load and 25℃ of ambient temperature. | ||||
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor. |
|||||
3.Tolerance:includes set up tolerance,line regulation and load regulation. | |||||
Label |
Mechanical Specification for led driver 24v